I concern about the heating my room because my computer system including Server also may heat down in summer, my sever heated down last year.

 And I think how to cool my computers, some ideas get up in my mind and plannning. They must be cheap, I mean it's easy to use expensive Cooling machine with utilities, it's not LOHAS and will give earth big damages easily.
 
 So that, I searched some cooling down the computer system... and I do as first treatment for cooling down.

 I must cool down my ROOM before the heating computer !

 To cool down ROOM, what do you get any ideas?? Fan? any machine? I must use more Lohas stuff.

 It's YOSHIZU, which is a reed screen, traditional cooling way, and low cost.

 The points of using a reed screen that,

 @ Wind can be through 
 @ Light weight
 @ Cheap-- it's only a dollor..
 @ Some sun lights are able to pass To go through wind is very important, for cooling down of course, when the taihoon or stream come, the power of heavy wind is possible to go throuh the reed, and protect to go away the reed screen. The light weight is also need for such a situation, or for taking away at dropping the reed screen.

 The cheap also need for the such a situation...lost money for be gone by winds, if it's so expensive screed.
 Sun light makes "light" and "heat", only heating must reject in summer. The reed screen have this choice, though 100% cut the heat, nice balances for the light and heat have one.

As picking up my posts, I've tried to set up Linux system on Dell Poweredge 2400 server machine since two months ago.  Also I hoped to get Linux knowledge with the setting up, but it not mean getting  how to use Linux only. To set up the hard system on Linux that I get Linux as software together.

 
First, what I wanted to do ,and the reasons.

Somebody use Notebook computer with Win-XP as a temporary server, when the main server go under maintanace or breaking down , either do I.

 However , in Summer, the tempo server machine have easy to heating up and down. Any cooling is necessary to cool down, and I have never seen best one.
 
 So, I made it.


































































.

I got a digital Camera....?

USB memory may discard easily. This is my sight to use USB memory safety.



There are two types of  additional data to use USB memory.
1: add several small size file
2: add big size file

Duble strategies for PCI card running I have.

First, using older linux  by 2.4.x driver.
Another, using on new Linux by 2.6.x driver which with remaking new kernel, this is so difficult operation.

First strategy results....  for 2.4.x kernel

=> Redhat 9.0
ftp://ftp.riken.jp/Linux/redhat/archive.redhat.com/redhat/linux/9/en/iso/i386/

-> install CD available to make by Img Burn
online install
ftp.riken.jp
/Linux/redhat/archive.redhat.com/redhat/linux/9/en/os/i386/

=> Redhat 8.0
ftp://ftp.riken.jp/Linux/redhat/archive.redhat.com/redhat/linux/8.0/en/iso/i386/

-> install CD available to make by Img Burn
 but minimum install only because second CD data broken

=> TurboLinux
ftp://ftp.turbolinux.co.jp/pub/TurboLinux/TurboLinux/ia32/Server/8/install/

=> Redhat 7.3
ftp://ftp.riken.jp/Linux/redhat/archive.redhat.com/redhat/linux/7.3/en/iso/i386/

By the way, I think....this plan, what I want, what is my goal...

 Currently my goal is to use Linux which would boot from Hard drive on PCI card. I've gotten a lot of skill to challenge this operation, it's a big wall for me. And I was a little begginer for Linux system before 2 monthes ago, I can operate Linux and know some details about Linux world, to use Linux for process of this PCI-HD challenges now.
 What a nice way to study Linux!!! If my goal was just to use Linux, I couldn't get such a lot of informations and operate well. To put high goal, I made it !!

1. confirm working of PCI-Hard drive on Redhat 9 kernel 2.4.x
2. bootable check from PCI hard drive on Redhat 9 and Cent OS.
3. check single boot by Cent OS.

I wonder No.3. because how the hard drive could be congnited which OS without 2.4.x kernel with Redhat 9. If any OS is able to install in hard drive on PCI card, the OS might run ?? If any the hard drive cannot use by booting, it's just for strage.

what happen to there..... I'm waiting for installing of Redhat9 now.

  I got knowing about Linix system, what Linux is..

As next steps, it's including study...I'm trying to connect ITE ATA133 PCI2 on Linux.
The PCI card is show up on Linux, but the drive is not able to appear.

I tried....

Fedora 10 
CentOS 5.3
Vine 4.2  --Redhat
Debian 5.01

not run on these system. confirmed appearing as PCI card. These relations are kernel 2.6.x. which might be hard to run the card by my website searching.

I knew no problem and no module need to run on the kernel 2.4.x, a guy can use easyly with Vine 4.0 on web search. So I tried to use Vine 4.0, I could not make appropriate the 4.0 install CD, can't be  installed.

And then I knew what it' working on Fedora 5, the installer is running now...

Install : FC-5-i386-rescuecd.iso
boot ftp: ftp://ftp.riken.go.jp
       /pub/Linux/fedora/core/5/i386/os
Install hint :  enter  linux askmethod  when first desktop img

what will  happen................

Though I wrote a post, my browser put downed with heavy memories. My space is hard to use and irritate on me. Nobody complain???

To get Linux skills, basically it's different that to use the computer and to study computer.

To use computer that I only get the skill I need to use. To study computer that I have to study the all but it's not all of them because of a lot and imppossible.

So that I have to decide which part of use I want to get the skill. However in case of Linux, the usage is usually for a network server, not graphic design, not for only mail.

And I start studying the linux for my sever. I knew Linux have many of types as the platforms which are Redhat, Ubuntsu, CentOS, Knnopix, Fedora...
I point out the differences.

Easy to say, It is good for neither one thing nor the other. The old type of linux finished to produce newly, use like MS-DOS command to do anything, possible to get many informations for old terms.
The newer linux have not enough the informations to solve the trouble and to operate, but possible to use like Windows/Mac operation(call as GUI), and heavy weight for Hard drive, the mean's " SLOW".

To mostly care the differnce is the command for the operaions. The command "apt" to install use on the old one, but new linux cannot accept the command, changed "yum", it totally different. And the problem's not only the different command.

To put it simply, the basic idea and aim are same, however the process is not same. I think if this "process" can share each other, Linux especially newer one "was" only OS in this world. It's too late....

I should study only new Linux GUI, fedora or....