Memphis Car Audio's MySpace Blog |

MySpace.com | rss | sign in

Memphis Car Audio

Memphis Car Audio

Last Updated: 12/23/2009

Send Message
Instant Message
Email to a Friend
Subscribe

Gender: Male
Status: Single
Age: 44
Sign: Capricorn

City: MEMPHIS
State: Tennessee
Country: US
Signup Date: 10/30/2006

Blog Archive

[Older Newer]

/ /

Friday, July 31, 2009

The New Gen MOJO is here!
Current mood:

bouncy

Now Shipping C3's and CM models! Visit an authorized Memphis Car Audio dealer near you to check out these monsters! We welcome any feedback you may have on these new models.

-Memphis Car Audio-

4:42 PM

12 Comments

(Add Comment) |

1 Kudos

Translate

Monday, June 18, 2007

MOJO Amplifiers
Current mood:

creative

Welcome Friends,
Thanks so much for viewing our MySpace page and thanks for adding us to your friends list! You are among the very coolest people on the planet!

   If you plan to purchase (or currently own) one of our MOJO amplifiers, we want to make it clear that we recommend strong electrical/charging system upgrades to your vehicle. The Mojo line consist of "The Baby Mojo" 16-MC1.2500 and "The Big Mojo" 16-MC1.4000.
16-MC1.2500~ (Mandatory Alternator Upgrade)    We suggest installing a high output alternator capable of generating 200 amps or more at certain rpm's. This amplifier accepts 0 gauge power AND ground wire terminal connections. We also strongly suggest using at least two dedicated system batteries with this amplifier (ideally located near your amplifier) rated at 1000 CCA or more. We also suggest using 2 Farads of capacitance. Please consider our 17-1FCAP or 17-1FCAPM 1 Farad capacitors to put the icing on the cake for this beast. Don't forget to upgrade your battery terminal wires to the same gauge wire used at the amp, especially your ground wire- and also upgrade your charging lead from the alternator to the same gauge wire. This amplifier will demand over 200 amps of current at full output with 14.4 Volts applied. Select a solid chassis ground and mount the amp in a well ventilated area for maximum rocking!
16-MC1.4000~(Mandatory Alternator Upgrade)    We suggest installing a high output alternator capable of generating 250-300 amps or more at certain rpm's. It is very common for people to use multiple alternators with this amp.

This amplifier accepts 0 gauge power AND ground wire terminal connections. We also strongly suggest using at least four dedicated system batteries with this amplifier (ideally located near your amplifier) rated at 1000 CCA or more. We also suggest using 4 Farads of capacitance. Please consider our 17-1FCAP or 17-1FCAPM 1 Farad capacitors to put the icing on the cake for this MEGA beast. Don't forget to upgrade your battery terminal wires to the same gauge wire used at the amp, especially your ground wire- and also upgrade your charging lead from the alternator to the same gauge wire. This amplifier will demand over 400 amps of current at full output with 14.4 Volts applied. Select a solid chassis ground and mount the amp in a well ventilated area for maximum windshield breakage!!!

-Share your MOJO stories with us-